GAIA III
Provides improved sound clarity and openness for floor standing speakers and subwoofers. 70 lbs (32KG) Max.

INTRODUCTION

About GAIA III
speaker isolators

Crafted with the vision of providing extraordinary acoustic performance, the GAIA III is the union of aesthetic visual design and acoustic engineering. The small compact design delivers unbelievable acoustic isolation that will bring out clarity and openness from your speaker like you’ve never heard.

The sound stage blossoms to open up a three-dimensional image of natural, spatial sound.

Designed for floor standing speakers and subwoofers weighing up to 70 lbs (32 KG), the GAIA III will provide more openness and clarity. Structural borne noise is greatly reduced while internal reflections from the hard-supporting surface are attenuated resulting in greater sound clarity and openness.

Specifications

Dimensions (W x H)
1.7” x 1.5” (43mm x 39mm)
Maximum weight
70lbs (32kg) per set of 4
Quantity
4 per box
Thread sizes included*
M6-1.0, M8-1.25 and ¼”-20

*Alternative thread sizes available on request from IsoAcoustics Distributors

INSTALLATION

How to install
GAIA III isolators

Optimal results are achieved by installing the GAIA isolators with the logo facing the listening position, or rotated 180 degrees, to align the isolators with the speaker’s motive forces. The GAIA III provides a high degree of isolation while resisting lateral movement and oscillations to maintain alignment with the listening position. Lift and place the speakers into position as the GAIA lower isolators will adhere to the supporting surface.

The GAIA’s are threaded into the base of the speaker or subwoofer to replace the existing spikes or feet. Threading the GAIA’s into the base of the speaker creates a strong connection with the speaker. With the top of the GAIA housing connected with the speaker and the bottom of the GAIA connected to the supporting surface, all of the energy is then managed by the GAIA’s internal isolator.

The GAIA III includes thread adaptors for sizes M6-1.0, M8-1.25 and ¼”-20. Alternative thread size adaptors are available upon request through IsoAcoustics distributors.

THREAD SIZES

thread sizes for
all speakers

GAIA isolators come with thread adaptors for the 3 most common thread sizes which fit the majority of speakers. Alternative thread sizes are available upon request through IsoAcoustics distributors.

TECHNOLOGY

Patented isolation technology

GAIA isolators are made from a high quality stainless steel construction, incorporating the IsoAcoustics design philosophy that combines precision and a passion to deliver extraordinary acoustic results.

awards + Reviews

customer feedback

Optional Extras

Carpet Discs

Designed to maintain stable support on carpet, the optional Carpet Spikes work with the GAIA III isolators to provide improved performance on thicker pile carpet and carpet with under pads.

 

F1 Speaker Jack

The F1 Jack is a tool designed to raise the side of a speaker to allow access underneath for the installation of the IsoAcoustics GAIA and GAIA-TITAN isolators.

FAQs

Isolation is effective on all types of flooring to minimize structure borne vibrations and prevent vibrations from reflecting from the supporting surface.
There is a common misconception that isolation is not required on hard concrete floors, but vibrations reflect back up from the solid concrete floor and also effectively travel quickly through concrete.
When used on thicker carpeting, the addition of the GAIA carpet disks can assist the GAIA and GAIA Titan have better connection to the floor.

The GAIA model should be selected based on the weight that they are supporting. The weight limits we set are based on the performance curve. The GAIAs perform well up to the specified weight limits, but once you are within 10% of the weight limit, we recommend using the next size up for best results. We do not recommend exceeding the weight limits of the GAIA’s or GAIA-TITAN’s.

Optimal results are achieved by installing the GAIA isolators with the logo facing forward, in line with the speaker’s drivers. Alternatively, they can be rotated 180 degrees to face the rear. The isolators are directional and are designed to be aligned with the speaker’s motive forces. The direction of the IsoAcoustics logo does not matter when used with turntables or audio components.

We have found the best results by orienting the GAIA’s to be front-facing, in line with the listening position.

The GAIA’s and GAIA-TITAN isolators come with thread adaptors for the 3 most common thread sizes which fit the majority of speakers. The thread adaptor sizes included are as follows:

  • GAIA III – M6-1.0, M8-1.25 and ¼”-20
  • GAIA II – M6-1.0, M8-1.25, ¼”-20
  • GAIA I – M8-1.25, M12-1.25, ¼”-20
  • GAIA-TITAN Theis – M8-1.25, M14-2.0, ½”-13
  • GAIA-TITAN Rhea – M8-1.25, M14-2.0, ½”-13
  • GAIA-TITAN Cronos – M10-1.5, M14-2.0, ½”-13

A wide variety of alternative thread sizes are available upon request through IsoAcoustics distributors.

The GAIA isolators come with the 3 most common thread sizes. If you require a different size, they can be ordered through the dealer that is selling the GAIA’s, or through our distributor. Click Here for the contact information for our distributor for your country.

If the speakers do not have threads, then the GAIA’s are not recommended. The OREA series is a common alternative when threads are not available.

Threaded inserts are available at most hardware stores and can be installed in the base of many types of speakers, but this is not typically recommended because of the risk of damaging the speaker. After the threaded inserts are installed into the speaker, the GAIA’s can be installed.

The GAIA series products are installed by threading into the base of speakers or components. The Advantage of this strong connection with the speaker or component is that all of the energy is managed by the internal isolators of the GAIA. This has a slight advantage compared to our other products which grip the bottom of the speaker by the isolators.

On smooth floors like hardwood, we recommend sliding a cloth underneath the GAIA’s by tilting the speakers to each side. Once the speakers with GAIA’s are on top of the cloth, the speakers can slide along the floors into position.
On carpeted floors furniture sliders can be placed under each GAIA to help them slide into place on the carpet.

Yes. For thicker carpet, we recommend using the GAIA carpet discs for best results so that that the GAIA’s connect to a solid surface.

1. Choose the correct threaded stud for your speakers, thread into GAIA, and tighten with the wrench provided.

2. Install locking nut and tighten by hand up against GAIA Housing.

3. Add locking nut to the upper threaded section.

4. Thread stud into the speaker (minimum 4 complete turns), align logo with the listening position and tighten locking nut up against the bottom of the speaker.

We do not recommend exceeding the specified weight limit. The weight limits are set based on the performance curve, not based on how much weight they can support. The performance of the GAIA is still strong at the weight limit but is quickly declining above this weight. If your speakers are within 10% of the weight limit, we recommend using a larger GAIA model for the best results.

Please click here for information on thread sizes and instructions on how to determine the thread size for your speaker or subwoofer.

Each model of GAIA Isolator comes with 3 common thread sizes. If none of these meet your needs, we also have many other thread sizes available through our distributors.

The threads included with the GAIA’s are as follows:

The GAIA I includes M12-1.25, M8-1.25 and 1/4”-20

The GAIA II includes M8-1.25, M6-1.0 and 1/4”-20

The GAIA III includes M8-1.25, M6-1.0 and 1/4”-20

Click here for more information on thread sizes and instructions on how to determine the thread size for your speaker or subwoofer.

If the speakers are fastened to the stands, then they tend to act as one and the GAIA series are recommended for installation on the floor stand.
If the speakers are resting on top of the stands, then we recommend isolation between the speaker and the stand. The OREA series are a great option in this case.

RELATED PRODUCTS

GAIA I

For floor standing speakers and subwoofers weighing 220 lbs (100KG) or less.
Size
2.5” / 62mm (W) x 1.9” / 49mm (H)
Thread
M8-1.25, M12-1.25, ¼”-20

GAIA II

For floor standing speakers and subwoofers weighing 121 lbs (55KG) or less.
Size
2” / 51 mm (W) x 1.7” / 43 mm (H)
Thread
M6-1.0, M8-1.25 and ¼”-20

F1 SPEAKER JACK

GAIA installation is now easier than ever

Find an IsoAcoustics dealer near you

Please select Product type:

Find an IsoAcoustics dealer near you

Please select your location:

Find an IsoAcoustics dealer near you

Please select your location: